If you are sure (or strongly suspect) that your home contains asbestos materials then it is often best to leave them where they are – especially if they are in good condition and unlikely to get damaged. You should check the condition of the materials from time to time to make sure they haven’t been damaged or started to deteriorate.
Slightly damaged asbestos-containing materials (ACMs) can sometimes be repaired by sealing or enclosing them. However, you should only attempt to do this if you have had the necessary training. Any badly-damaged asbestos material that is likely to become further damaged should be removed if it cannot be protected. Some materials (sprayed asbestos coatings, asbestos lagging / insulation or asbestos insulating board) should only be removed by a contractor licensed by HSE. Your local environmental health officer can provide advice on this.
If you are planning any DIY home improvements, repairs or maintenance – and intend to bring in any additional builders, maintenance workers or contractors – you should inform them of any asbestos materials in your home before they start work. This will help reduce the risks of any ACMs being disturbed. HSE strongly encourages the use of trained professionals to repair or remove ACMs. If you choose to carry out DIY repairs or remove damaged asbestos materials yourself, make sure you wear the right protective equipment and follow safe working methods. For advice on doing this, see: Asbestos essentials task sheets.
In addition, please be aware that ACMs need to be legally disposed of as hazardous waste. This should not be mixed with normal household waste. You may be able to arrange to have it collected or there may be special facilities in your area you can use to dispose of it. Contact your local authority for information about asbestos and its disposal .
There are a number of practical publications on asbestos available for free download on the HSE website.